Nationwide Electrician Directory
23 Aug 2016
appliance

Appliance Repair & Maintenance

Appliance repair vs. replacement

Major appliances are the cornerstones of modern life. Without these trusty devices, people would be reduced to washing their clothes by hand and cooking meals over an open fire.

It’s no wonder that a broken appliance can amount to a pretty big problem in most households, and the question of whether to repair or replace these devices can even create a lot of anxiety.

When it comes to repairing appliances, every device eventually reaches a point of diminishing returns. If it’s cheaper to fix an appliance than replace it, the smart money is usually on the fix. However, it doesn’t make sense to fix a device that is likely to break down again in the near future or become technologically obsolete.

Considerations when deciding whether to opt for appliance repair or replacement:

Age: The age of an appliance needs to be considered when deciding whether to repair or replace. Most appliances have an average life cycle and once an appliance passes that point, it’s usually a good idea to replace. Antiques and some high-end appliances are the exceptions to the rule, as they may be extremely expensive to replace.

Warranty: Determine if your appliance is under warranty, because you might be able to have it repaired at a reduced rate or free of charge. Warranties are important because replacement parts are expensive and can even cost more than the cost of purchasing a new appliance. Make sure your warranty is covered by a factory-authorized appliance repair shop.

Price: Appliance repair professionals say when the price of the repair totals more than half the cost to purchase a new appliance, you’re better off replacing the appliance.

You should consider appliance repair when:

  • The appliance is under warranty.
  • The appliance is an antique that would be difficult to replace.
  • The repairs are minor and will extend the life of the appliance for several years.

It’s time to replace an appliance when:

  • The appliance is not under warranty.
  • The repairs are extensive and add up to more than half the price of the appliance’s original cost.
  • The appliance is technologically obsolete.

Preventive maintenance tips

The best way to keep your appliances running smoothly is to practice preventive maintenance. Many appliances fail because they are overused or misused by the consumer.

Appliance repair professionals say homeowners should read the operational manuals that come with appliances and follow instructions for proper use and preventive maintenance.

Washing machine

  • Make sure not to overload the machine, or it could prematurely wear out.
  • Set the water level to an appropriate setting based on the amount of clothes in the washer. Failure to do so can put additional stress on the motor.
  • Check pockets before placing clothes in the washer. Many problems are caused when foreign objects become lodged within the washer.
  • Appliance repairmen suggest replacing the washer fill hose every five years.

Dryer

  • Clean out the lint trap after each load to improve efficiency and reduce the chance of a fire.
  • Have the outside vent inspected annually.

Refrigerator

  • Clean the condenser coils. When these coils become caked with dust, the fridge has to work harder which puts more stress on the unit and increases energy consumption. Use a vacuum to remove dust, pet hair and dirt.
  • Check the door seal. The fridge’s door seal is responsible for keeping food cold and maximizing efficiency. Replace the seal if needed.

Range, stove or oven

  • Instead of using the self-cleaning function, appliance repairmen recommend cleaning up spills as they occur and using drip pans to catch spills.

Dishwasher

  • Clean your dishwasher’s filter to remove hard water deposits and debris.
  • Clean your dishwasher’s filter to remove hard water deposits and debris.
  • Clean your dishwasher’s filter to remove hard water deposits and debris.

Garbage disposal

  • Keep the blades sharp by running cold water and sending a cup of ice down the disposal.
  • Run cold water for 10 seconds before inserting food into the disposal and for 30 seconds after each use. Cold water helps solidify grease and fat so they can be chopped up by the disposal.

Hiring an appliance repair service

There are many factors consumers need to consider before hiring an appliance repair service. Home appliances are expensive, and you want to ensure the company you hire is reputable and has the skills required to complete the fix in a timely and efficient manner.

Tips for hiring an appliance repair service:

Research potential hires. Get at least three estimates and compare the bids based on price, parts, labor and warranty. You also want to research how long the company has been in business, check reviews on Angie’s List and speak with past clients.

Inquire about costs. Expect to pay up to $100 for a typical service call. Additional parts and labor charges will apply if you hire the company for a repair, but many companies will deduct the service charge.

Check skill level. It’s important to hire a company whose employees have the training to complete the job. Ask if the employees are factory trained or certified in appliance repair.

Is the work under warranty? Check to see if the repair service guarantees its work, and determine how long. Most warranties vary from 90 days to one year.

 

Source:https://www.angieslist.com

 

13 Aug 2016
appliance

5 Tips for Hiring an Electrician

Every home needs electrical repairs from time to time, but because of the dangers involved, these repairs don’t make safe do-it-yourself projects. Most folks will be better off hiring professional electricians. And because these services are expensive, here are some tips on how to get the most bang for your buck:

1. Don’t be Mislead by an Electrician’s Hourly Rates

Many people pay too much attention to the hourly rate electricians charge. This amount can vary from $30 to $70. However, a truly skilled, well-equipped electrician with a truck full of parts that charges $65 an hour can be a much wiser choice than an inexperienced hack, working with inadequate tools and no parts, but charging $35 per hour. The hourly rate only has meaning when it is considered along with the firm’s work quality, equipment and experience.

2. Compare the Electrician’s Travel Charges

Travel charges can have a big impact on your costs and are in some ways easier to compare than hourly rates. Many electricians spend a third or more of their time navigating traffic. So every electrician has to find a way to pay for expense of driving all over town each day.

Some charge a higher rate for the first hour, some charge a flat “trip charge,” some charge a minimum for each visit, and some simply compensate for travel time by charging a higher hourly rate.

When you first call the professional, ask how and what they charge and see if it makes sense for your situation. For example, a trip charge and a relatively low hourly rate make sense on a longer job. For a shorter job, you’ll do better with someone who absorbs travel costs by charging a higher hourly rate.

3. Bundle Electrical Repair Jobs Together

To save money and time on electrical work, bundle projects together. Any time you discover an electrical problem, put it on a list.

When you feel it’s time to call an electrician, review your list and then conduct a mini-inspection of your home. Look for faulty switches and dysfunctional or crowded outlets. When the electrician comes, you’ll save money and time by getting everything taken care of at once.

4. Get Prepared Before the Electrician Arrives

The less time the electrician spends dealing with inconveniences, the more money you will save. Before the electrician arrives, prepare a precise list of items you want serviced. Also, make sure the electrical panel box is accessible and clear away fragile items and knickknacks from areas where you expect the electrician to work.

5. Install Money-Saving Electrical Fixtures

  • By switching from ordinary incandescent light fixtures or bulbs to fluorescent ones, you can substantially reduce energy consumption in your home.
  • Motion detector switches can help you save money on outdoor lighting while at the same time providing very cost-effective security to your home.
  • Creative landscape lighting and indoor accent lighting can make your home more appealing to you, your guests and potential buyers in the future.

 

Source:http://www.homeadvisor.com

03 Aug 2016
Young repairman fixing an industrial air conditioning compressor.

Electricians

Finding a home electrician

Most homeowners call electricians in an emergency or if they’re building or remodeling. It’s important to research a contractor and find a skilled electrician before you need one. By building a rapport with an electrician, you can be sure that they will be there to help when you need their services. So, you’ll want to hire an electrician for regular inspections before an emergency takes place. A good electrical contractor will become familiar with your home’s systems and possibly discover emerging problems before they become major situations.

Hiring an electrician is an important decision because they work with critical home systems that affect nearly every aspect of the building and can cause significant inconvenience, damage or even house fires if the work goes wrong.

As always, homeowners should get multiple bids to ensure they received the best price for the service. To vet the companies, homeowners should ask about the following items:

Up-to-date education: A reputable company will require staff to attend regular training courses and stay current on the National Electrical Code, which is amended every three years.

Pulling permits: A permit is usually required in most counties and from the power company any time you’re replacing a home’s main electrical equipment or doing a significant amount of rewiring. The cost of the permit is often included in your electrician’s bill, but be sure to ask. With the permit comes an inspection to ensure the work meets code.

Legitimate licensing: If your state requires electricians to be licensed, check that the license is current. Poor wire connections, overloaded circuits, improper grounding and broken safety elements on an electrical panel are just a few of the problems that can arise from bad workmanship. To check an electrician’s licensing, refer to the Angie’s List License Check tool. You should also protect yourself by verifying the hold the appropriate bonding and insurance, including general liability and workers’ compensation coverage.

Specialization: Since companies specialize in different areas and scopes of work, it’s important for homeowners to hire the right company. If a homeowner only wants to replace outlets and switches, then he or she probably shouldn’t waste time calling commercial electricians that wire large buildings.

Find out who’s doing the work: You’ll want to know if the electrician does the job themselves, if they employ helpers or apprentices, or if they use subcontractors. In the case of helpers and apprentices, verify that a licensed electrician will supervise them, and in the case of subcontractors, make certain their insurance covers you as well.

Ask about their warranty: Highly rated electricians say a good contractor will offer a parts and labor warranty to show that they stand behind their work.

Most electricians learn on the job through an apprenticeship program of several years, which tends to vary by state. Most state licenses require a certain number of hours of on-the-job training. The path of how to become an electrician depends on several factors, including whether the company is union or non-union, state regulations and the demand for more electricians in that region.

The path on how to become electrician usually starts either with an apprenticeship or a term as an electrician’s helper. Electricians in training observe their mentors at work, take on some of the task, learn the roles of electrician’s tools and take on greater and greater responsibility as they progress. Their salary also increases by year until they’re reader to take the test to acquire their electrical license. They can also undergo specialized education at a technical school or a union training facility, which usually involves matching the trainee with an appropriate electrical contractor.

Electrical projects

Unless you know what you’re doing exceptionally well, carefully consider the prospects if you’re planning on do-it-yourself electrical work. You can easily get in over your head, causing costly damage, creating potentially dangerous hazards and run afoul of local or state electrical code and regulations. In general, electricians say you can handle installing receptacles, outlets and lighting fixtures as a DIY job if you have a clear idea what you’re doing, but more complex work requires expert help.

Electrical work covers a wide variety of tasks, ranging from major jobs like home rewiring or breaker box replacement to minor work like installing fans or upgrading electrical outlets with USB ports.

Though the basics of electrical work have not significantly changed in the last few decades, electrical contractors and homeowners alike face new challenges as advancing technology creates heavier demand on electrical loads and presents new opportunities for major upgrades such as home automation.

Electricians can also conduct home electrical system inspections that will identify problem areas, future trouble spots and areas of immediate concern. Such an inspection can take place before you buy a home or any time afterwards to check your status.

Your home may be giving you several clues that you need immediate help from a professional electrician. If you feel mild shocks or tingles from appliances, you may have a ground fault issue that requires attention (although shocks after crossing a carpeted surface aren’t cause for concern.) If your ceiling fixtures are warm or lights are flickering, that may be a sign of loose wiring. Light switches or receptacles that turn on and off at random could be signalling a problem with loose wiring or internal damage. If any outlet emits a burning odor or sparks, shut down the electrical panel right away and call an electrician for help, as you could be at immediate risk for fire.

Many homes built before 1950 contain old-fashioned knob and tube wiring, which is widely believed to pose a hidden risk to homeowners. It was the primary wiring method from the 1880s through the 1930s, and still used into the 1970s for some new home constuction. This form of older wiring creates a risk of faults and fires, and often can’t handle the electrical load of modern houses. How much does replacing knob and tube wiring cost? You can expect to pay between $8,000 and $15,000 for an average-sized home.

Electricians can also install whole house surge protectors for between $300 and $1,000. Whole house surge protection blocks incoming surges at the breaker box and can protect your electronics and appliances from damaging electrical surges if you live in an area prone to lightning strikes.

Older and outdated breaker boxes often present problems such as fire hazards or overloaded circuits. Licensed electricians say a breaker box replacement will range from $500 to $3,000 depending on the sie of the house and the type of box.

Electricians can also install and upgrade outlets for safety purposes. An arc fault circuit interruptor (AFCI) outlet cuts off power in the breaker box as soon as it detects a sharp spike or drop in voltage. This prevents dangerous sparks or excessive heat, which is a common cause of residential electrical fires. AFCI upgrades cost about $40 per breaker plus labor, so electricians estimate this work should cost between a few hundred and a few thousand dollars, depending on the scope of the replacement. A ground fault circuit interruptor (GFCI) outlet detects disturbances in current and shuts off electrical flow quickly. This protects against electrical shock by breaking the circuit immediatley, faster than circuit breakers or fuses. They are typcially installed in areas that come in contact with water, like kitchens or bathrooms, but can be installed anywhere. Although they primarily protect against electrocution, they also provide further protection against fires and damage to appliances. A GFCI outlet can normally be identified by the “reset” and “test” buttons on their face.

Types of electricians

Although the study of electrical phenomena goes back to ancient times, it was not until Thomas Edison’s era that electrical currents could be sufficiently controlled to be used in homes.

Edison wasn’t the first inventor to build a light bulb, but he developed the first electric-powered bulb that would actually stay lit and not burn itself out after a few minutes of use. He patented his invention in 1880 and soon afterward founded Edison General Electric.

Many other electric companies quickly sprang up across the U.S. and in Europe as the race was on to generate electricity and disseminate it to businesses and homes. Natural gas light fixtures and kerosene lamps were phased out as the electric networks grew.

This rapid growth also created a demand for a new profession — the electrician. Even today, the job of electrician can be dangerous and even deadly. In the early years there were not yet many safety features, so electrocution and fires were not uncommon. However, today’s electricians , electrical engineers and linemen are extensively trained to provide the safest possible service.

Electricians are trained to recognize a variety of important elements, including staying familiar with the most up-to-date version of the National Electric Code and knowing what the electrical wire color codes mean. Modern-day electricians need continuing training and education. They fall into different classifications:

Residential electricians install, maintain and upgrade electrical equipment in apartments and houses. They may also install outdoor landscape lighting. Their scope of work covers everything from outlet improvements to breaker box upgrades and total home rewirings. They also work on construction jobs to install wiring and boxes in new homes. Many states also have a special subset of electrical contractor license to cover installing home security systems and alarm work.

Commercial electricians work on construction sites, in commercial buildings and on mechanical electrical systems. Most commercial electricians perform some installation work, which may involve water heaters, commercial security systems and electronic key systems.

Journeymen electricians work with mechanical connections, lighting installation, power supplies, security systems and communications in both residences and commercial buildings. Journeymen electricians have completed several years of on-the-job training and acquired the appropriate license in their state. They are qualified to work in a wide variety of electrican contracting tasks and can usually oversee apprentices or helpers. A journeyman electrician may also work on overhead lines.

Master electricians are highly skilled electricians who generally work in a supervisory role or own contracting businesses. Many states require seven years of experience as an electrician or a bachelor’s degree in electrical engineering for certification as a master electrician. Licensing specifics vary by state, but in numerous cases, a business with numerous journeyman electricians must have a master electrician who oversees the entire operation.

 

Source:https://www.angieslist.com